取消
AdblueOBD2 Emulator for MAN Trucks Plug and Drive

AdblueOBD2 Emulator for MAN Trucks Plug and Drive

深圳市德胜汽车电子有限公司
所在地:广东 深圳
最新产品 进入店铺
  • 详情
  • 联系方式

undefined

AdblueOBD2 Emulator for MAN Trucks Plug and Drive Ready Device by OBD2

 

adBlueOBD2 emulator for MAN Trucks is a Plug & Drive Ready device to mulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems,  even with damaged adBlue SCR system.
 
Top 5 Reasons to Get AdblueOBD2 Emulator for MAN Trucks:
 
1. ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
2. ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. ADBlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug adBlueOBD2 from OBD2 connector.
 
Installation and Calibration for MAN Trucks:
 
1. Pull the Key out from the ignition.
2. Remove the following Fuses (MAN) 894 - 737 - 738
3. Plug adBlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
 
Legal Notice:
 
AdBlue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions  in vehicles. We recommend you to use adBlue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your adBlue/DEF tank.
 
Package including:
 
1pc x adBlueOBD2 Emulator Box Interface
1pc x User Manuel English

 

 

undefined

undefined

以上为"AdblueOBD2 Emulator for MAN Trucks Plug and Drive"供应信息
相关推荐
产品分类 更多 >
新品速递 查看更多 >
中国供应商> 汽摩检测设备> 诊断仪> AdblueOBD2 Emulator for MAN Trucks Plug and Drive