取消

日本志贺IV-3A/4A导流轮原装进口

江苏京明翰仪器设备有限公司
所在地:江苏 连云港
最新产品 进入店铺
  • 详情
  • 联系方式



描述:型号IV-3AIV-4A导流轮是类似型号IV-2B的通过贯通主轴孔将冷却液送到切削刀具的回转接盘。尽管尺寸不同,但是这两种型号均旨在相同的用途;用于比较低速运行和低压润滑。这些型号允许使用水溶性冷却液。型号IV-3A用于型号7F-60G-AP以下的型号,而型号IV-4A则用于型号3R-75G-AP以上的型号。

 

特点:1.允许使用水溶性冷却液

      2..許容回転数IV-3A 1000 min−1  IV-4A 800 min−1

      3.許容圧力0.2mPa

      4.吐出量IV-3A  50 L/min (at0.2MPa)  IV-4A  100 L/min (at0.2MPa)

      5.重量IV-3A 1300g  IV-4A  2550g

 

 

Models IV-3A and IV-4A inducers are, like Model IV-2B, rotary couplings that supply coolant to

cutting tools through the through spindle hole. Though different in size, these two models are designed for the same purpose of use; for comparatively low speed operation and low pressure lubrication. These models permits the use of water soluble coolant. Model IV-3A is used for Model 7F-60G-AP or smaller models and Model IV-4A for Model 3R-75G-AP or larger models

 

.HOW TO USE AND NOTICES

1.Water soluble coolant will shorten the service life of Inducers

2.For piping, it is recommended to use flexible hoses. However, piping can be directly connected

to an inducer without using a hose in low speed operation (500 min−1 or lower).In this case, piping must not be twisted.

3.Coolant can be used after being filtered through a wire netting or a strainer

4.For CW spindle rotation

 


以上为"日本志贺IV-3A/4A导流轮原装进口"供应信息
相关推荐