德国Wazau摩擦系数测试仪ISO 8295 供应进口摩擦系数试验仪 型号：RPG型
Friction Tester Type RPG compliant to ISO 8295
Application: Determination of friction behavior of packaging material, plastic foils etc.
Principle: The tester serves to test the friction behavior of two samples moving relatively to each other. The test can be conducted in accordance with ISO 8295 (test of plastic foils, determination of friction behavior). It is used for quality assurance purposes.
For a test the lower specimen, e.g. a metal plate, is mounted on the measurement slider. A jig connected to the force measuring unit holds the the upper specimen. By means of a dead weight the contact pressure is generated. During the measurement the slider is moving against the resistance of the friction pairing at a velocity of 100 mm/min. The measured value of the friction force is continuously monitored. The sliding distance is about 60 mm. The advance velocity can be set ranging from 5 - 300 mm / min prior to the measurement by means of the software.
The friction tester is equipped with a 5 N friction force sensor connected via an amplifier and an USB interface to a computer.The software works with an USB module, providing a resolution of 12 bit.
The slider can be optionally equipped with a heating plate for temperatures up to 80℃ connected from below. The power supply is 230VAC +/-10% (50Hz).
cope of supply:
1. Friction force sensor 5 N Dead weight 200 gr
2. Basic tester with electronical amplifier, measurement slider and advance unit
3. Software runs under Windows 2k, XP, including USB interface.
Heating plate up to 80℃.